<VV> Relay for heater blower motor

[Dennis PLEAU]

I'm not sure how the radio shack relay is made, but I followed the directions in the tech guide by lclc and used the NAPA relay he recommended and it worked great.
 
Dennis



> From: dfamily at fairpoint.net> To: virtualvairs at corvair.org> Date: Wed, 23 Apr 2008 19:28:46 -0400> Subject: <VV> Relay for heater blower motor> > I just installed a 30 amp relay (radio shack 275-226) for the heater blower motor (new Clark's) in my son's 65 monza following Bob Helt's instructions in his book Classic Corvair. Previously, the motor would blow a fuse after running for a while.> The relay and motor seems to work all right but I noticed that the blower motor will shut off on the low and intermediate speeds when the ignition switch is turned off; however, if I turn off the ignition switch when on high speed the motor keeps running until the heater control switch is turned off.> Is this the way it is supposed to work with a relay, or do I have a wiring problem? I prefer that it shuts off when the ignition is switched off.> > Dennis Dorogi> 63 rampside> 65 4 door.
_________________________________________________________________
Spell a grand slam in this game where word skill meets World Series. Get in the game.
http://club.live.com/word_slugger.aspx?icid=word_slugger_wlhm_admod_april08