<VV> Gas line

chris c ricorvair at cox.net
Fri Feb 15 12:16:35 EST 2008


Currently it the electrical harness, brake lines, and fuel line are 
bundled together.

About 1 foot inside the tunnel at the front is where I cut the fuel line.

Did not know if their was a safety reason why they were all together.  
Or if their were places that were going to be inhearantly unsafe to run 
the fuel line, say outside the tunnel, running along the exterior of it.


Clipped to the body inside the tunnel.


Harry Yarnell wrote:
> Not sure I understand what you mean by 'everything running together', 
> nor am I quite sure what portion of the line you cut. I'm assuming the 
> line at the point where the rubber hose connects to the tank 
> (bodyside, not the stub coming out the tank).
>
> I don't see why you can't run it anywhere you want, as long as 
> nothing's going to rub it, or heat it...
>
> harry yarnell
> perryman garage and orphanage
> hyarnell1 at earthlink.net
> ----- Original Message ----- From: "chris c" <ricorvair at cox.net>
> To: "VirtualVairs AA" <VirtualVairs at corvair.org>
> Sent: Friday, February 15, 2008 11:22 AM
> Subject: <VV> Gas line
>
>
>> Does the gas line on my 65/110 have to be run like it came out, or can I
>> move it to the other side (where everything isn't run together).
>>
>> The end by the tank was heavily rusted, and broke off when I removed the
>> tank.
>>
>> I cut the line a foot or so in and it is solid and junk free.  Making me
>> think I could just flare the end and repair the last couple feet.
>>
>> Thinking of replacing the long brake line while I was at it.
>>
>> Opinions?
>>
>> Is their a reason why the line has to be run  as it came out
>>
>> I am looking at replacing the fuel line on my 65 monza 4dr.
>>
>> I have
>>
>> Is their any reason why it has to be run exactly where the factory did
>> it.  It seems like
>>
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all 
>> copyrights are the property
>> of the writer, please attribute properly. For help, 
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options: 
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>>
>
>
>




More information about the VirtualVairs mailing list