<VV> Trunk Light

[Jim Bannister]

The mercury switch is in the base of the lamp socket.  You can test its
operation by measuring continuity with an ohm meter.
Jim,

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Mike Kost
Sent: Thursday, January 03, 2008 7:31 AM
To: virtualvairs at corvair.org
Subject: Re: <VV> Trunk Light

Geoff,

If it's an early I wouldn't know, but if it is a late you could remove 
the plug in the bottom of the trunk and watch for light on the ground. 
Another thought (which will work on any year) would be to place your 
camcorder in the trunk and shut the lid. This way you could check to see 
if it comes on when you park on a sloped driveway or drive up a hill.

Mike Kost

Geoffrey Johnson wrote:
> Never been around a car with one.
>
> How does the light get switched on?  I assume a mercury switch.  
> Where? One in the new corsa vert works nicely, just wondering where 
> the switch is.   Want to make sure it is not sticking on.
>
>
> -Geoff Johnson

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________