<VV> Distributor initial settings on a 140
steven at sashimi.org
steven at sashimi.org
Thu Jan 10 20:18:49 EST 2008
Yup, pinging was considerable at 16 degrees. At 8 degrees I'm not
detecting any clear ping. Idle and off the line acceleration are
noticeably better at 8 than when at 4 degrees so I'll stick with that for
now.
Thanks,
- Steve
Original Message:
-----------------
From: Bryan Blackwell bryan at skiblack.com
Date: Thu, 10 Jan 2008 19:03:31 -0500
To: steven at sashimi.org
Subject: Re: <VV> Distributor initial settings on a 140
That's what I read - the distributor code is referenced in the shop
manual. You might wish to try a little less to start, most 140s will
ping at 18.
--Bryan
On Jan 10, 2008, at 6:13 PM, Steven wrote:
> Thanks for the guidance. With a couple of bright lights, a
> handheld mirror, and reading glasses I was able to read the
> distributor DELCO REMY and what looked like IHO388 or perhaps 338
> or 380. Not easy with the dist. installed! After looking it up in
> the shop manuals I believe it realistic to believe it's 1110330.
> That would make sense since the engine has 140 heads, and 4 carbs,
> etc., even though the block is RD.
>
> So if it's a 330, then the initial timing should be more like 18
> degrees rather than 4 degrees?
>
> - Steve Brown
--------------------------------------------------------------------
mail2web LIVE Free email based on Microsoft® Exchange technology -
http://link.mail2web.com/LIVE
More information about the VirtualVairs
mailing list