<VV> modulator line on PG

[Bryan Blackwell]

FYI, when I replaced the little hoses on the GB, both ends fit into  
the nipple - balance tube and modulator.  I think it was 1/4" hose,  
but take the old one along to be sure.

--Bryan

On Jul 29, 2008, at 12:05 PM, corvairduval at cox.net wrote:

> Note, the vacuum line fits snug n the metal hoses and goes over the  
> barbs
> on the metal line. At the balance tube, the metal line to the valve  
> seems
> to fit inside the balance tube nipple. Drawings in shop manual.