<VV> Gluing stuff questions.

Louis Armer carmerjr at mindspring.com
Mon Mar 10 00:52:48 EDT 2008


It may be as simple as using a 2 part epoxy cement and maybe a small 
stainless steel radiator hose clamp to hold the
gear on the splines as the epoxy sets.

Chuck Armer
/////////////////////////////////


At 09:45 PM 3/9/2008, you wrote:
>Not much Corvair content but I need to tap the expertise of the group.  I
>need to glue a nylon gear on to a steel shaft.  What kind of stickum will
>hold in this situation?  The cruise control motor for my '69 Cadillac land
>yacht has cracked the little pinion gear that drives the cruise control
>linkage.  Originally the gear was pressed onto the shaft and help with some
>tiny splines.  Meanwhile, the gear has cracked  allowing it to expand
>slightly and loose grip on the splines.  I'm hoping to find something
>that'll bind everything up nice and solid.  Any ideas?
>
>
>
>Jim B., '66 Corsa turbovert,  '69 Cadillac convertible
>
>  _______________________________________________
>This message was sent by the VirtualVairs mailing list, all 
>copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________

CORSA Tri-membership Chairman
CORSA Member
Corvanatics Member
Corvair Atlanta Director
SECC Member
1965 Corsa Coupe
1964 Greenbrier
1965 Corsa Autocross car 1/2 owner
http://darthvair.com


More information about the VirtualVairs mailing list