<VV> 67 Monza 110 PG - Initial carburetor idle adjustment screw setting ?

[Bryan Blackwell]

Sure, you can hot adjust them if you like.  However, a proper cold  
adjustment will work just fine.  In any case, I suggest you run the  
engine for a good half hour before touching them.  The fact that the  
dealer mechanic couldn't properly adjust the lifters cold doesn't  
mean that you didn't.

--Bryan

On Oct 9, 2008, at 12:56 PM, Charles Lee wrote:

> However, the valves were initially 'cold adjusted' after
> re-installation, with the engine off according to the manual, and I
> believe that each rocker should now be backed out 'until it clatters'
> and then turned back in 1/4 turn ?