<VV> Front body clip for a late

[aeroned at aol.com]

....and in case you don't keep track of where everyone on VV is, Stephen (and the front clip) is located in the Dallas, TX area....

Ned







-----Original Message-----
From: Bryan Blackwell <bryan at skiblack.com>
To: Stephen Upham <contactsmu at sbcglobal.net>
Cc: Virtual Vairs <virtualvairs at corvair.org>
Sent: Mon, 8 Sep 2008 8:32 am
Subject: Re: <VV> Front body clip for a late



FWIW, this section should work on any late model.  It would need to  
be modified for the side lights on a 68 or 69, but the basic sheet  
metal is the same for all three body styles as far as I know.

--Bryan

On Sep 8, 2008, at 1:11 AM, Stephen Upham wrote:

> I have a front clip from a '66 Monza that was going to be used to
> repair my Monza when it was damaged last year.  I'll sell it for my
> cost.  I doubt that it could be shipped easily (unless you know
> something I don't - probably pretty likely...ggg)  So, if you are
> willing to pick it up let me know.  I paid $200 for it.  It consists
> of the left front fender cut at the wheel well, the entire front
> clip, and the entire right fender to the front door.  It is a rust
> free section as this was a Texas car.

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________