<VV> Vacuum hose connections : 1967 110 Monza PG

Bryan Blackwell bryan at skiblack.com
Tue Sep 16 12:05:15 EDT 2008


On Sep 15, 2008, at 10:35 PM, Charles Lee wrote:

> I believe the vacuum advance hooks to the inlet at the base of the  
> right
> (passenger) carb, and the vacuum crossover does the rest ?

You want the ported vacuum connection, that's the vertical one on the  
carb.
>
> Anything else I ned to consider to make sure this is not a problem  
> when
> I get the new plug wires and try to fire her up ?

You should also prime the oiling system before startup.  I'd also  
suggest filling the carbs with gas via the vent holes if you have a  
mechanical pump.

--Bryan



More information about the VirtualVairs mailing list