<VV> LM drain holes at base of both windshields info?

[Jeff Schramm]

Joe - on my '65 the windshield drain holes are 15/64" x 1/2" (i.e., an
oval) and they're 1/4" in from the pillar. I don't know where they
drain into. I don't have the back glass out so I can't check that,
sorry.

On Thu, Dec 24, 2009 at 8:08 PM,  <Taruffi57 at aol.com> wrote:
> I believe that down in the curved corners of both the front & rear
> windshields, there should be small drain holes.  My car is having  bodywork/paint
> done and had enough rust in all 4 that I cannot see if there  are/were those
> holes present.  Can someone inform me as to possible size of  holes and
> where they should be -- from the vertical steel roof support  pillars?  Also,
> where would they drain into?  Down into the cowl  plenums?
>
> Thanks for any info.
>
> Joe Dunlap
> Lady Lake, Fl.
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>