<VV> wire terminal supplier

[ricknorris at suddenlink.net]

I believe Frank Parker was the one that turned us on to Waytek.
He's like that ya know!
--
Rick Norris
#36 Sunoco Corvair
www.corvairalley.com 

---- Bryan Blackwell <bryan at skiblack.com> wrote: 
> I think what you're looking for was posted by Dave Thompson, I've  
> pasted it below.  For general wiring needs, I've also used Waytek,  
> they carry all kinds of handy stuff - relays, circuit breakers, wire,  
> heat shrink sleeves, etc.
> 
> --Bryan
> 
> > From: "Dave Thompson" <dave.thompson at verizon.net>
> > Date: April 12, 2008 3:52:59 AM EDT
> > To: <sharpiebandit06 at bellsouth.net>,	"'Vair Club'"  
> > <VirtualVairs at corvair.org>
> > Subject: Re: <VV> wiring (slight change of subject)
> >
> > Guys,
> >
> > The Corvair uses the 56 series terminals & connectors.
> > I've found a source for them at a very fair price. See this web link:
> > http://wirelm.com/
> >
> > He has all the plastic connectors and metal crimp terminals from one
> > terminal through 6 terminals. You have to call him on the phone to  
> > order
> > them but he shipped them to me the next day, even before he got my  
> > check in
> > the mail.
> >
> > I found that my Radio Shack number 276-1595 crimp tool (about $10)  
> > makes
> > nice factory-like crimps. I even like it better than my $100+ AMP  
> > crimp
> > tool; I seem to have better control. Be sure that you crimp twice;  
> > Once for
> > the wire and again for the insulation. Use two different parts of the
> > crimper so you don't over crimp the insulation.
> >
> > I have used nothing but those connectors throughout my car to make  
> > any new
> > wiring look as stock as possible, even on my stereo.
> >
> On Jan 4, 2009, at 6:48 PM, Dave Ziegler wrote:
> 
> > Some time ago someone posted a source for all kinds of wire terminals.
> > The company had no web site but did have a catalog and the owner was a
> > nice guy who would take the time to talk to you about your needs. I
> > have searched every where I can think of but I cannot recover this
> > information. Does anyone remember this fellows name and or contact
> > information?? He carries Corvair type terminals. ( Corvair content) I
> > would sure appreciate it if someone can come up with this info.
> 
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________