<VV> Recommended alignment specs

[Duane, Jim E.]

Hi Frank.

We were shooting for 2!  He cranked in both sides until the inner nut bottomed out.  Ironically, it isn't that bad!  Not twitchy, rather stable  

JED

-----Original Message-----
From: virtualvairs-bounces at corvair.org [mailto:virtualvairs-bounces at corvair.org] On Behalf Of FrankCB
Sent: Tuesday, July 28, 2009 10:22 AM
To: Duane, Jim E.; John O'Shea; virtual vairs
Subject: Re: <VV> Recommended alignment specs

Jim,
     You should be able to get as much as 5 deg. caster in front if that's what you want.  My son Jim had requested 7, but we had to settle for 5 - 1/2 to get each side the same.  I believe the stock specs are much lower.
     How much do you want???
     Frank "frequently out of alignment" Burkhard

In a message dated 07/28/09 10:14:48 Eastern Daylight Time, JDuane at advprograms.com writes:
Another minus:   The bushing Kit I got from Clarks (or maybe it is my car) did not allow enough adjustment (ran out of threads) for front caster.  I need to look into that one...
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________