<VV> body needed

Marc Marcoulides hharpo at earthlink.net
Mon Jun 1 15:32:07 EDT 2009


How about removing the bed and fabricating steel supports going from bed attachment points on truck to front suspention and foward motor mount attachment points

-----Original Message-----
>From: BBRT <chsadek at comcast.net>
>Sent: Jun 1, 2009 12:26 PM
>To: Marc Marcoulides <hharpo at earthlink.net>, virtualvairs at corvair.org
>Subject: Re: <VV> body needed
>
>Well, the body is longer than one and half or more 8 ft beds and wider than 
>the widest pickmeup bed, so if you put it in at an angle and supported it 
>hanging out the back, you could probably do it... or angled it upward toward 
>the front over the cab, but Lord help you if you got a cross wind! Or went 
>around a corner too fast as you are talking at least a 1000 lb.. Best way is 
>on trlr. (Behind pick up truck...)
>
>C
>----- Original Message ----- 
>From: "Marc Marcoulides" <hharpo at earthlink.net>
>To: <virtualvairs at corvair.org>
>Sent: Monday, June 01, 2009 3:17 PM
>Subject: Re: <VV> body needed
>
>
>> Is it possible to put a late cp or conv body in a pick up and drive cross 
>> country? By body I mean no interior, doors, suspention, hood, engine 
>> cover, drive train or upholstrey.
>>
>> -----Original Message-----
>>>From: Jim Houston <jhouston001 at cfl.rr.com>
>>>Sent: Jun 1, 2009 8:22 AM
>>>To: Ajkolaniak <ajkolaniak at aol.com>
>>>Cc: virtualvairs at corvair.org
>>>Subject: Re: <VV> body needed
>>>
>>>Definitely, but I'm trying to find something a bit closer before I look
>>>on the other side of the country..  :-P
>>>
>>>But thanks for the reply...
>>>
>>>Jim
>>>
>>>Ajkolaniak wrote:
>>>> Sound like Charlie Dye would be the man to see!
>>>>
>>>>
>>>>
>>>> In a message dated 05/31/09 19:03:28 US Mountain Standard Time, 
>>>> virtualvairs-request at corvair.org writes:
>>>> On May 31, 2009, at 11:59 AM, Jim Houston wrote:
>>>>
>>>>
>>>>> I'm probably wasting time and bandwidth, but you never know,
>>>>> so . . .  I
>>>>> would like to find a '65 or '66 coupe body that doesn't have huge rust
>>>>> issues.  My Monza is turning out to have a lot of rust that is
>>>>> going to
>>>>> be expensive to fix.  I have come to the conclusion that I might be
>>>>> able
>>>>> to find a better body for less money than I'm going to have to spend
>>>>> fixing this one.  So, if anybody  has such a body, drop me an email
>>>>> offline and let's see what we can do.
>>>>>
>>>>> Thanks in advance,
>>>>>
>>>>> Jim Houston
>>>>>
>>>>  _______________________________________________
>>>> This message was sent by the VirtualVairs mailing list, all copyrights 
>>>> are the property
>>>> of the writer, please attribute properly. For help, 
>>>> mailto:vv-help at corvair.org
>>>> This list sponsored by the Corvair Society of America, 
>>>> http://www.corvair.org/
>>>> Post messages to: VirtualVairs at corvair.org
>>>> Change your options: 
>>>> http://www.vv.corvair.org/mailman/options/virtualvairs
>>>>  _______________________________________________
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> No virus found in this incoming message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 8.5.339 / Virus Database: 270.12.48/2148 - Release Date: 
>>>> 06/01/09 06:09:00
>>>>
>>>>
>>> _______________________________________________
>>>This message was sent by the VirtualVairs mailing list, all copyrights are 
>>>the property
>>>of the writer, please attribute properly. For help, 
>>>mailto:vv-help at corvair.org
>>>This list sponsored by the Corvair Society of America, 
>>>http://www.corvair.org/
>>>Post messages to: VirtualVairs at corvair.org
>>>Change your options: 
>>>http://www.vv.corvair.org/mailman/options/virtualvairs
>>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights are 
>> the property
>> of the writer, please attribute properly. For help, 
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America, 
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options: 
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>
>
>--------------------------------------------------------------------------------
>
>
>
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.5.339 / Virus Database: 270.12.48/2148 - Release Date: 06/01/09 
>06:09:00
>





More information about the VirtualVairs mailing list