<VV> Oil pressure shut off switch

Bryan Blackwell bryan at skiblack.com
Wed Jun 24 10:49:40 EDT 2009


You sent this message from an address that isn't on the list.  Sorry  
it's not the big bad VV moderators picking on you.

--Bryan

On Jun 24, 2009, at 9:33 AM, John Beck wrote:

> Hmmm   12 hours for this to be posted.  Looks like I'm being  
> moderated.  Sorry if talking about oil pressure is to  
> controversial.  --J.B.
>
>
> ---- John Beck <jb30343 at windstream.net> wrote:
>> I haven't tried this but...  it would be simple (and very  
>> inexpensive)
>> to design a circuit that would use the signal from a pressure  
>> sender to
>> switch the idiot light to ground and shut off power to the fuel pump.
>> Add a 556 and you could put a delay into the fuel pump shut off to  
>> allow
>> a pre start prime.  Easily hidden for a stock look.  --J.B.
>>
>> Bryan Blackwell wrote:
>>>
>>> I don't know if such a beast exists - there are snap switches that
>>> basically can turn something (a light) on or off.  Then there are
>>> senders for pressure.  I think you need to plan to install two
>>> senders.  To do that, you might consider moving the whole thing away
>>> from the fan belt.  See a couple examples here:
>   _______________________________________________



More information about the VirtualVairs mailing list