<VV> FC Clutch Head Bolt Size

[Ron]

If they are rusted in that badly, use a vise grip pliers on the diameter of 
the bolt head and things will be a lot easier.
RonH

----- Original Message ----- 
From: "Keith Hammett" <k.j_hammett at att.net>
To: <eprosise at hotmail.com>
Cc: <virtualvairs at corvair.org>; "CorvanAntics" <corvanantics at gmail.com>
Sent: Wednesday, May 27, 2009 8:06 PM
Subject: <VV> FC Clutch Head Bolt Size


> Quick trip to garage to check the one I bought a couple years ago...F30 
> Snap-On.  I suggest you buy a lifetime guarantee as you will probably 
> break it several times getting out those bolts that are rusted.  SOAK 
> first, second, and third, then try.  Soak again, try again...
>
> I managed to get all mine out without breaking the F30 using an impact 
> wrench.
>
> Good Luck
>
> Keith Hammett
>
> -------snip-----------
> All -
>
> I ordered what I thought was the correct one from Snap-on, and I was 
> wrong - really close though (F29E or something like that).
>
> What is the correct size for the tool??  I tried Clarks - they are 
> discontinued.
> -------snip-----------
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>