<VV> 64 Leaf Spring

[Ken Lundy]

Dave,
I would not recommend drilling holes in your a-arms for this... I would not
attempt it, with my limited experience.... the location of the leaf spring
is very precise.
If you attempt it be very careful.
Good luck.
Ken Lundy
NJ
64 Convertible 4-Speed


Message: 2
Date: Wed, 4 Nov 2009 10:45:18 -0800
From: Mark Durham <62vair at gmail.com>
Subject: Re: <VV> 64 transverse leaf spring
To: Ken Lundy <klundy at optonline.net>
Cc: Virtual Vairs <virtualvairs at corvair.org>,
    dave.thompson at verizon.net
Message-ID:
    <cc6b0fc10911041045y76b5f0edl7f3fcff2b4fc244b at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1

Dave, when you get it installed, let me know what kind of handling
improvements you get with the leaf spring on. That was my focus on thinking
I would like to add that to my 62.
Mark Durham

On Wed, Nov 4, 2009 at 10:43 AM, Mark Durham <62vair at gmail.com> wrote:

> Dave, that certainly is the best way to go, that way everything is standard
> and should be a easy setup. Thanks for the pics, Ken. :):)
> Mark Durham
>
>   On Wed, Nov 4, 2009 at 6:03 AM, Ken Lundy <klundy at optonline.net> wrote:
>
>> Dave,
>> Mark Durham mentioned that I might take some pictures of my leaf spring
>> for
>> you.
>> Attached are 2 pictures showing how the ends are connected to the a-arms.
>> Hope this helps.
>> Ken Lundy
>> NJ
>> 64 Convertible 4-speed
>>
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: Leaf Spring Right_1.jpg
>> Type: image/jpeg
>> Size: 55319 bytes
>> Desc: not available
>> Url :
>> 
http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20091104/bbbb5f18/a
ttachment.jpg
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: Leaf Spring Left_1.jpg
>> Type: image/jpeg
>> Size: 55943 bytes
>> Desc: not available
>> Url :
>> 
http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20091104/bbbb5f18/a
ttachment-0001.jpg