<VV> 64 Parking/Signal Lights Not Working Latest Information

[Thomas Gwyther]

I have had good luck with WD40.  I didnt need to replace the sockets I sprayed WD40 in from the light side and at the wire side and worked the wires back in and out, they freed up and have been working for years.

Thomas Gwyther




> Date: Thu, 19 Nov 2009 06:12:12 -0800
> From: mr_zrxv65 at yahoo.com
> To: VirtualVairs at corvair.org
> Subject: <VV> 64 Parking/Signal Lights Not Working Latest Information
> 
> Well, I finally had time to look at my lights last night.  It turns our to be as simple as the connection between the bulb and socket.  Most of the time there is a spring pressure applied to the bulb as it is inserted into the socket, but mine were lose so you could wiggle the bulb to make them work.  Does anybody have a good source for replacement sockets?  One of the sockets has already been replaced, but it is so cheap that bulb holder portion fell out of the socket.
>  
> Thanks again,
>  
> Jason
> 
> 
>       
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________
 		 	   		  
_________________________________________________________________
Windows 7: I wanted simpler, now it's simpler. I'm a rock star.
http://www.microsoft.com/Windows/windows-7/default.aspx?h=myidea?ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WWL_WIN_myidea:112009