<VV> Air Hoses----Made in USA?

jvhroberts at aol.com jvhroberts at aol.com
Wed Oct 21 15:52:55 EDT 2009

 Do a google search for polyurethane air hoses. All will become clear. Typically, they only come preassembled with NPT ends, or whatever. The hoses are smaller in diameter than the PVC or rubber hoses, due to the thinner walls allowed by the stronger and tougher material. They do have a reinforcement braid in them. They are WONDERFUL! 


John Roberts


-----Original Message-----
From: Chris & Bill Strickland <lechevrier at earthlink.net>
To: virtualvairs at corvair.org
Sent: Wed, Oct 21, 2009 1:28 pm
Subject: Re: <VV> Air Hoses----Made in USA?

>Except polyurethane! 

John --

Can you offer any additional description of these hoses?  In this area, 
I am not familiar with anything being marketed as 'polyurethane hose', 
however, we do have 'push-on hose', named after the fittings that it is 
designed for, which sounds similar -- rugged, all-weather flexible, 
expensive ...

The PVC air hose is nice and cheap, but only good for actual use when it 
is over 85º, otherwise, any colder, and it is extension hose material 
only, more like barely flexible pipe instead of hose.

Bill Strickland
This message was sent by the VirtualVairs mailing list, all copyrights are the 
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 


More information about the VirtualVairs mailing list