<VV> Exhaust Log change

Mark Durham 62vair at gmail.com
Thu Oct 22 17:47:15 EDT 2009

The exhaust stacks look great, so ordered a set of repro 140 manifolds to go
with my new 140 dual exhaust.

Mark Durham

On Mon, Oct 19, 2009 at 1:32 PM, Mark Durham <62vair at gmail.com> wrote:

> Thanks, guys. I'll take a look at the pipes when I get the logs off and
> make sure to seat each properly.
> So JR, if I have to change out any exhaust stacks, are they just a press
> fit and come right out once the pushrod tubes are moved? Its been 1970 since
> I had a engine apart and the cobwebs are really thick! I remember looking at
> them, but did not even remove the manifolds when I did the valves.
> Thanks
> mark
>   On Sun, Oct 18, 2009 at 9:09 PM, <62Vair at gmail.com> wrote:
>> Hi all, I have a EM 62 coupe and need to change the 47 year old exhaust
>> manifolds. It looks pretty straight forward, but is there anyone out there
>> that has tackled this job and has seen problem areas? Thanks for any help.
>> I ordered a reconditioned set from Clarks with the new Stainless Steel
>> studs.
>> Mark Durham
>>  _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights are
>> the property
>> of the writer, please attribute properly. For help, mailto:
>> vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>>  _______________________________________________

More information about the VirtualVairs mailing list