<VV> Tires for the 67

jvhroberts at aol.com jvhroberts at aol.com
Wed Sep 16 07:48:15 EDT 2009


 Actually, no. The 205mm refers to the section width of the tire at its widest point on a specified rim width. This is the width typically at the middle of the sidewall. 

For 70 series tires, the tread width varies from manufacturer to manufacturer, but usually it's around 85-90% of the section width. Here's some help:

http://www.tirerack.com/tires/tiretech/tirespecskey.jsp


 


John Roberts

 


 

-----Original Message-----
From: Dennis Pleau <dpleau at wavecable.com>
To: Mikeamauro at aol.com; virtualvairs at corvair.org
Sent: Wed, Sep 16, 2009 12:06 am
Subject: Re: <VV> Tires for the 67










The tread width will be the same 205cm.

dp

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Mikeamauro at aol.com
Sent: Tuesday, September 15, 2009 7:16 PM
To: virtualvairs at corvair.org
Subject: <VV> Tires for the 67

Needing tires and still pondering what to do. Presently using  205/70/14s 
mounted on Camaro rally wheels. I'm considering changing to  205/75/14. This

change in profile would provide a slightly taller tire, with a  little 
narrower tread width. It's the wife's driver, and the narrower width  would
help 
a little in low speed turning situations. Has any one else used the  
205/75/14 size on a late model? Comments? Thanks...Mike Mauro
 


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________



 



More information about the VirtualVairs mailing list