<VV> Tires for the 67

[aeroned at aol.com]

I doubt that a 80 inch wide tire will fit under the fender.... ;^)



Inches = CM x 0.3937

Inches = MM x 0.03937



Ned


-----Original Message-----
From: Dennis Pleau <dpleau at wavecable.com>
To: Mikeamauro at aol.com; virtualvairs at corvair.org
Sent: Tue, Sep 15, 2009 11:06 pm
Subject: Re: <VV> Tires for the 67




The tread width will be the same 205cm.

dp

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of Mikeamauro at aol.com
Sent: Tuesday, September 15, 2009 7:16 PM
To: virtualvairs at corvair.org
Subject: <VV> Tires for the 67

Needing tires and still pondering what to do. Presently using  205/70/14s 
mounted on Camaro rally wheels. I'm considering changing to  205/75/14. This

change in profile would provide a slightly taller tire, with a  little 
narrower tread width. It's the wife's driver, and the narrower width  would
help 
a little in low speed turning situations. Has any one else used the  
205/75/14 size on a late model? Comments? Thanks...Mike Mauro
 


 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the 
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________