<VV> update: nasty noise when clutching

[J R Read_HML]

Roll the input shaft on a piece of glass (or something that you KNOW to be 
true) to be sure it is absolutely straight.  If it is not straight, it WILL 
attack the pilot bushing.

Later, JR

----- Original Message ----- 
From: "Ray Rodriguez III" <grymm at echoes.net>
To: <virtualvairs at corvair.org>
Sent: Wednesday, September 23, 2009 8:44 PM
Subject: <VV> update: nasty noise when clutching


> The other thing I noticed was the input shaft pulled out easily... it 
> didnt fall out but didnt give any resistance to being pulled out... so 
> maybe the pilot bushing is wallowed out as well.
>
> Ray Rodriguez III