<VV> sway bar swap

[Ron]

Has anyone installed an Addco bar on a '61 without the dimples?  If so, how 
is it done and are the lower A frames modified OK?
RonH
(2 '61 wagons)

----- Original Message ----- 
From: <judynrandy at comcast.net>
To: <VirtualVairs at corvair.org>
Sent: Sunday, February 21, 2010 8:53 PM
Subject: <VV> sway bar swap


>
>
> Please be merciful. I've never done it before. Nor have I ever had a need 
> to look to see if it has "dimples". I may be wrong, but when I had the car 
> up on the rack at the Corvair Ranch (hi Jeff) to change a tie rod end, I 
> looked. I don't recall seeing anything. What do I do if there are none? I 
> guess i'm afraid of drilling the holes in the wrong place. Is it that 
> critical or am I worrying for nothing. Thanks for your patience
>
> Randy (cap'n) Hook
>
> 63 monza ragtop
>
> 84/pg
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>