<VV> Bed liners

[dennis dorogi]

I sprayed the bed of my rampside with duplicoat bedliner in a spray can 
after a few coats of epoxy primer (bed was sandblasted).  I used the rattle 
can because it gave a very smooth finish and not much texture at all.  I 
tried the same product in gallon cans but it has a different formula and 
goes on with a rougher texture.  I even called Duplicolor about this and 
they said the gallon cans had a different formula and would not give the 
same effect as the rattle can.   So I just bought many spray cans and went 
at it.  I like the effect -almost like a paint but with a hint of texture. 
It looks close to stock - not like bedliner, & it was so easy to put on.

I don't know about durability as my rampside is mainly a show vehicle (98 
points at Buffalo convention).  It seems quite durable to me.  I like the 
fact that that this bedliner can probably be removed easily in the future, 
and what I like the best is if it does get scuffed I just touch it up with 
the spray can, and it looks great again.  It would work well in a van or 
Greenbrier.  It is easy to try and cheap and you can easily do some test 
panels for durability.

Dennis Dorogi


----- Original Message ----- 
From: "BBRT" <chsadek at comcast.net>
To: "Jimmy Harris" <harrisjimmy60 at yahoo.com>; <Corvanatics at corvair.org>
Cc: <virtualvairs at corvair.org>
Sent: Wednesday, January 06, 2010 9:50 PM
Subject: Re: <VV> Bed liners


> Thanks, Good tip.
>
> Chuck S
> BBRT
> ----- Original Message ----- 
> From: "Jimmy Harris" <harrisjimmy60 at yahoo.com>
> To: <Corvanatics at corvair.org>
> Cc: <virtualvairs at corvair.org>
> Sent: Wednesday, January 06, 2010 9:46 PM
> Subject: <VV> Bed liners
>
>
> Bed liners are too ruff, BUT you could use road guard or chip guard
> ( like at bottom of late model cars & trucks for rock chips ) it is a
> lot smoother and not so ruff that you can't clean it. It also can be 
> painted
> and it comes in a spray can, kind of soft but tough once cured good. Also
> pretty good sound deadner. 3 to 5 coats. Available in clear, gray, &
> black and maybe more colors. I like the clear and paint the color with 
> flex
> add.
> Some texture to hide, like really bad orange peal. E-mail or call for more
> help Jimmy's Paint & Body hope this helps. Jimmy cell 615.633.3082
>
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.427 / Virus Database: 270.14.128/2604 - Release Date: 
> 01/06/10
> 19:35:00
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>