<VV> Help! Ignition Messed UP
Chaz at ProperProper.com
Mon Jul 5 15:20:26 EDT 2010
I don't know if this helps, since it does not have AC wiring, but if it
I'd like to update it to include ancillary wiring for such things as AC and
anything that even tangentially impacts the ignition system ?
Good luck with your Vair !
----- Original Message -----
From: "Bill H." <gojoe283 at yahoo.com>
To: <virtualvairs at corvair.org>
Sent: Monday, July 05, 2010 11:52 AM
Subject: <VV> Help! Ignition Messed UP
> Hi all...I'm in the middle of installing A/C in my car, and so far,
> everything that can go wrong, has gone wrong!
> Now somehow I messed up my plug wires and ignition wires. There is an
> insulated "resistor" wire, that goes on one side of the coil. Then I see
> a yellowish-gold wire, it came loose from its terminal and I can't figure
> out where this wire goes, but it looks like another ignition wire.
> Doesn't that go on the coil also?
> Also, what's the best and easiest way to determine how to put the
> distributor wires back correctly? I have the firing order right, and I've
> gotten the notch on the vibration damper pulley within the timing scale on
> the block, but I've tried to put both #1 and #2 wires at the terinal where
> the rotor's pointing. The car backfires and almost starts, but won't.
> Help! And thanks everyone. Hope you're all having a great Forth!
> Bill Hershkowitz 69 Monza 110 PG
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> Post messages to: VirtualVairs at corvair.org
> Change your options:
More information about the VirtualVairs