<VV> flanged bolts
Dave Ziegler
dziegler3 at comcast.net
Sat Jul 17 15:13:11 EDT 2010
All three sizes are readily available from Clarks Corvair Parts
Dave.. .
On Jul 17, 2010, at 2:22 PM, Dennis Johnsey USN ((ret)) wrote:
> Here's a link to a "before and after" slideshow of the '62 Corvair
> van's engine compartment restoration, which is being done on behalf
> of the Texas Military Forces Museum, in Austin,Tx:
> http://s152.photobucket.com/albums/s197/dilligras/?
> action=view¤t=5771a2a9.pbw
> I still have to hook up the carb linkages and tighten all the bolts
> and fasteners for the top shrouding and install the new coil. The
> coil (from O'Reilley's) says to only use it with a resistor wire or
> external resistor , and I recall there being a woven cloth-looking
> insulated wire back by the coil, next to the wire that goes to the
> + terminal. I'm thinking that might be the wire they mean.
> My rinky-dink generator broke, so I can't do any more sanding for
> awhile; but there's plenty more to do on the interior, brakes,
> lights, and underpinnings. Trying to chase down a few of the three
> sizes of flanged bolts for the shrouding, but no luck so far.
> Carry on,Dennis'62 Custom van w/'66 110hp and powerglide "The Grey
> Ghost"
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all
> copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-
> help at corvair.org
> This list sponsored by the Corvair Society of America, http://
> www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/
> virtualvairs
> _______________________________________________
More information about the VirtualVairs
mailing list