<VV> Overheating - Deflashing Heads

[Charles Lee]

OK, The small plate that covers the oil cooler fins, a little hatch panel on 
the trailing edge of the top shroud ?

Just wasn't familiar with the name !

Thanks for the clarification  !

----- Original Message ----- 
From: "Michael Kovacs" <kovacsmj at sbcglobal.net>
To: "Charles Lee" <Chaz at ProperProper.com>
Cc: "VV" <virtualvairs at corvair.org>
Sent: Monday, July 26, 2010 4:23 PM
Subject: Re: <VV> Overheating - Deflashing Heads


Left side of engine directly behind the oill cooler there is a rectangular
opening. this is to recirculate warm air for winter driving. In summer you 
cover
the hole with a plate. check the manual
MIKE KOVACS



----- Original Message ----
From: Charles Lee <Chaz at ProperProper.com>
To: BBRT <chsadek at comcast.net>
Cc: virtualvairs at corvair.org
Sent: Mon, July 26, 2010 6:08:42 PM
Subject: Re: <VV> Overheating - Deflashing Heads

What is this "summer air recirc plate " you mention ?

Being in SoCal, I think this is (even more) important ?


----- Original Message ----- 
From: "BBRT" <chsadek at comcast.net>
To: "Charles Lee" <Chaz at ProperProper.com>
Sent: Monday, July 26, 2010 3:01 PM
Subject: Fw: <VV> Overheating - Deflashing Heads


>
>> .....air recirc plate needs to be installed so all the fan air goes down 
>> and
>> not out into the engine comparment. Engine shroud seals should be in
>> place to limit air coming up into engine comparment......
>>
>> Good Luck.
>>
>> Chuck S
>> BBRT
>> YS 073
>> GT3 Yenko Clone
>>
>> ----- Original Message ----- 
>> From: "Bill H." <gojoe283 at yahoo.com>
>>