<VV> PG to 4spd conversion ? Aarrgghh !!

airvair at earthlink.net airvair at earthlink.net
Sat Jun 5 02:03:19 EDT 2010


If you'd see my 4door. you'd know that there IS no equavelant car in existance. It has ALL the possible options. You name it. it has it. including the factory window sticker. Changing it may become not an option.
As to "ruining" it. that is a matter of opinion. I am no lover of manuals. so an automatic is just as if not more desirable than a manual.
-Mark

----------
Sent from my Verizon Wireless mobile phone

------Original Message------
From: Charles Lee <Chaz at ProperProper.com>
To: "Ray R. \(aka Grymm\)" <vairguy at echoes.net>,<virtualvairs at corvair.org>,"J R Read_HML" <hmlinc at sbcglobal.net>,
 "Charles Lee" <Chaz at ProperProper.com>
Date: Fri, Jun 4, 10:50 PM -0700
Subject: Re: <VV> PG to 4spd conversion ? Aarrgghh !!

If I had an automatic LM sedan I'd trade you !

Too bad about your knee, but otherwise it's a shame to take the only car I'd 
prefer over a Corsa (a 4-speed sedan !) and ruin it ?

Sorry about your knee though -

Charlie (Lee, last name as requested)


----- Original Message ----- 
From: <airvair at earthlink.net>
To: "Ray R. (aka Grymm)" <vairguy at echoes.net>; <virtualvairs at corvair.org>; 
"J R Read_HML" <hmlinc at sbcglobal.net>
Sent: Friday, June 04, 2010 10:43 PM
Subject: Re: <VV> PG to 4spd conversion?


> It's never been right since. J
>
> ----------
> Sent from my Verizon Wireless mobile phone
>
> ------Original Message------
> From: J R Read_HML <hmlinc at sbcglobal.net>
> To: "Ray R. \(aka Grymm\)" 
> <vairguy at echoes.net>,<virtualvairs at corvair.org>,"J R Read_HML" 
> <hmlinc at sbcglobal.net>
> Date: Sat, Jun 5, 12:20 AM -0500
> Subject: Re: <VV> PG to 4spd conversion?
>
> Find someone who wants to change his 4spd to a PG and swap cars.
> Later, JR
>
> ----- Original Message ----- 
> From: "Ray R. (aka Grymm)" <vairguy at echoes.net>
> To: <virtualvairs at corvair.org>
> Sent: Friday, June 04, 2010 8:28 PM
> Subject: <VV> PG to 4spd conversion?
>
>
>> How easy or difficult a conversion is this on late and early cars?  Is it
>> a 100% bolt-on procedure?
>>
>>
>> Ray "Grymm" Rodriguez III
>> Lake Ariel, PA
>> CORSA member
>> 66' Corsa 140/4 coupe
>> 65' Corsa 140/4 coupe (under construction and almost done!)
>> _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are
>> the property
>> of the writer, please attribute properly. For help,
>> mailto:vv-help at corvair.org
>> This list sponsored by the Corvair Society of America,
>> http://www.corvair.org/
>> Post messages to: VirtualVairs at corvair.org
>> Change your options:
>> http://www.vv.corvair.org/mailman/options/virtualvairs
>> _______________________________________________
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
> 




More information about the VirtualVairs mailing list