<VV> No brake light on right rear of 65 Monza

[J R Read_HML]

Probably poor grounding.  Ground is strong enough for turn signal (one 
light) but not strong enough for both (brake lights).  If that is not the 
answer, take a look at the turn signal switch.  Does it fully cancel?
Later, JR


----- Original Message ----- 
From: "John Gull" <johngull at bellsouth.net>
To: <virtualvairs at corvair.org>
Sent: Tuesday, May 11, 2010 9:41 PM
Subject: <VV> No brake light on right rear of 65 Monza


> Dear Gurus , I cannot get the right rear brake light to work on my 65 
> Monza!
> Any ideas? I have replaced bulbs and sockets with no success! Both turn
> signals and running lights work on either side. The brake light on the 
> left
> side also works.  Very puzzled! Thanks for any ideas.  John
>
>
>
> John Gull
>
> PO box 16074
>
> Asheville, NC 28816
>
> 828-712-7902
>
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________