<VV> Smitty's tool/parts list, 2 of 3

[Lon Anderson]

Short and long handle ratchet handles
1”, 2”, 3”, 6”, 8” extensions.
Oil press sender socket.
Spark plug socket.
6” and 10 “ adjustable wrenches
Combination wrench set.  3/8 to ¾.
Flare nut wrench set.
Ignition tools kit.
MORE
          GM cantilever jack and Corvair jack with handles.
          Multi meter
          Small dwell/tach
          Timing light
          Tube flare kit and 1 ea, tubing 18” long, 3/16, ¼, 5/16.
          Probe type test light.
          24” jumper wire with alligator clip ends.
          K D ½” plug thread insert kit.
          ¾ LB ball pien hammer.
Series of screwdrivers including straight and Philips, Stubbys, and 90 degree offsets.
5” and 10” vise grips.
10” channel locks
8” gas pliers.
Needle nose pliers.
5” side cutters.
1/16, 1/8, 3/16, ¼ tapered drift punches.
Small wire brush and old tooth brush.
Inspection mirror.
Stick magnet.
Utility knife.
Gasket scraper.
8” smooth and course files.
8” tape measure.
Spare Parts
          Fan belt.
          Road tested fuel pump.
          Fan hub with new bearing.
          Idler with new bearing.
Rear axle with freshly lubed new bearing installed.