<VV> Steering Column Possessed By Demons!

[Jim Houston]

  The column housing(?) can move down toward the floor and away from the 
wheel and cause this to happen (don't ask me how I know)..  Check to see 
if the clamp near the floor and the one under the dash have allowed the 
housing to move...

Jim Houston
'65 Corsa

On 10/15/2010 2:32 PM, Ken Maxwell wrote:
> Hi Guys!
>
> I am totally stumped! I replaced the turn signal switch with a new one from
> Clark's on my '65 Turbo Corsa (standard steering wheel&  column) and now the
> steering wheel misses snugging up against the collar by about 3/16 of an
> inch! This causes the self canceling mechanism not to function properly.
> It's almost as if the steering shaft itself has been pulled out towards the
> driver by about that much. I even tried installing a stock '65 wood wheel I
> have and it misses by the same amount. Any ideas about what I did wrong or
> is the beast possessed and requires an exorcism?
>
> Thanks!
>
> Ken Maxwell
> Louisville, KY
>
> 65 Corsa
> 67 Monza
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>   _______________________________________________
>