<VV> Bearing Seal
Frank DuVal
corvairduval at cox.net
Sat Apr 9 17:52:37 EDT 2011
If you are seeing a rubber seal, just pry it out gently with a very
small (1/8 or smaller) screwdriver. You can reinstall it as long as you
don't mangle it.
Frank DuVal
On 4/9/2011 5:32 PM, Bob Gilbert wrote:
> Howdy Folks,
>
> I Have a '63 Coupe and I'm servicing the real wheel bearings. I have the
> bearing off the axle, what is the best way to remove the seals?
>
> Thanks,
> Bob
>
>
More information about the VirtualVairs
mailing list