<VV> valve adjustment

[BobHelt at aol.com]

Bruce, 
Are you sure that the lifter is on the base circle? Also can't open your  
photo. What the heck is a v-card? Please is something more common for the  
photo.
Regards,
Bob Helt
 
 
In a message dated 8/23/2011 2:09:45 P.M. US Mountain Standard Time,  
brucea at wildblue.net writes:

I am  re-assembling my 64-110 eng. when I set the valve lifters initial 
setting.  (before starting) no. 4 intake  stops  at zero lash,( pushrod just  
stopped spinning) with no threads showing above the nut. the other studs all  
show a few threads showing above the nut.  Will this self adjust when I  
start and adjust the valves while running, or do I have a  problem?
...,Bruce