<VV> clutch job

[Ron]

I suggest that you check with Clark's catalog and see which 61-63 parts 
aren't applicable for 64's, if any.  Then you'll know whether you have a 
problem or not. RonH

----- Original Message ----- 
From: "Bruce Alexander" <brucea at wildblue.net>
To: <virtualvairs at corvair.org>
Sent: Saturday, August 27, 2011 8:33 AM
Subject: <VV> clutch job


>I am replacing the clutch assembly. in my 61 Rampside. I ordered from 
>Clarks, bolted flywheel, rebuilt pressure plate and 9" clutch disc. And all 
>the associated seals gaskets bushings etc. They are all for 1961 to 1963. 
>Now, I have come to find out my engine is 1964 car  engine.  my question 
>is, Can I successfully use these clutch rebuild parts  for 61-63 on this 64 
>engine. one concern is the clutch fork pivot ball stud.  Help please !
> ...,Bruce
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Bruce Alexander.vcf
> Type: text/x-vcard
> Size: 361 bytes
> Desc: not available
> Url : 
> http://www.vv.corvair.org/pipermail/virtualvairs/attachments/20110827/d23fc775/attachment.vcf
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
>