<VV> Electric Fuel Pump

[Daniel Monasterio]

> Date: Tue, 27 Dec 2011 04:28:26 -0800
> From: gojoe283 at yahoo.com
> To: dixon5553 at yahoo.com
> CC: virtualvairs at corvair.org
> Subject: <VV> Electric Fuel Pump
> << I installed the pump with gas in the tank. It's messy, you'll get gas splashed on you when you are disconnecting the tank hose and installing the pump, but it can be done. >>
If you first disconnect the inlet pipe from the mechanic pump and blow air (mouth is good enough) back to the tank, till you hear air bubbling in the tank, you will break the siphon around the tank thus, avoiding gas spillage when disconnecting the outlet tank hose. 
Daniel Monasterio
> 
> 
> 
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>  _______________________________________________