<VV> AC Bezel Install

[aeroned at aol.com]

That CCP post doesn't answer Brian's question...nice try though. Matt, you need to search better LOL!!

The "washers" are a real PITA to get over the rivets, but that is how they are installed. I used a very small socket to help drive them on to the rivet. Take care with the front of the bezel, the "chrome" chops/peels easy.

The most annoying thing is that this repo is far from good quality. Mine sags so much in the center, it actually hits the vent. Given the price, I expected a much better part, maybe even billet. It is, however, better than the really bad 45 year old broken plastic it replaced.

Ned










-----Original Message-----
From: Matt Nall <patiomatt at aol.com>
To: virtualvairs at corvair.org
Sent: Mon, Jan 10, 2011 10:24 am
Subject: Re: <VV> AC Bezel Install


http://corvaircenter.com/phorum/read.php?1,350552,351040#msg-351040

att Nall
harleston, Oregon
ttp://mysite.ncnetwork.net/reswr0kp/


-----Original Message-----
rom: Brian <bmoneill at juno.com>

 recently purchase one of the reproduction LM center AC bezels.  It is supposed 
to attach to the stock inner vent with rivets.  The rivets have a conical shaped 
washer that I think are supposed to be pushed over the rivet to lock it in 
lace.  It seems they are too small no amount of effort can make them even start 
over the rivets.  Any help?????  Thanks in advance. 

 
_______________________________________________
his message was sent by the VirtualVairs mailing list, all copyrights are the 
roperty
f the writer, please attribute properly. For help, mailto:vv-help at corvair.org
his list sponsored by the Corvair Society of America, http://www.corvair.org/
ost messages to: VirtualVairs at corvair.org
hange your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
_______________________________________________