<VV> '61 doors removal

[Ken Clark]

That was one thing tried with large phillips, but the phillips broke, may need to drill it out.  Got one of 3 out at least.  Ken
 
 

> CC: virtualvairs at corvair.org
> From: dziegler3 at comcast.net
> Subject: Re: <VV> '61 doors removal
> Date: Thu, 30 Jun 2011 14:13:31 -0400
> To: kcvair at hotmail.com
> 
> A hand impact driver with a phillips bit that fits snugly.
> 
> Dave.. ..
> On Jun 30, 2011, at 1:45 PM, Ken Clark wrote:
> 
> >
> > Is there any easy/good way to remove the doors off a '61 Lakewood. 
> > The fronts appear to mave bolt heads on the inside of the car and 
> > the heater hose would have to be removed. The rear doors have 
> > phillips head bolts on lower hinge. We got one bolt loose and the 
> > next step may be drilling the other 2 out. any suggestions on 
> > something that has been in place for 50 years. Ken Clark 
> > _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all 
> > copyrights are the property
> > of the writer, please attribute properly. For help, mailto:vv- 
> > help at corvair.org
> > This list sponsored by the Corvair Society of America, http:// 
> > www.corvair.org/
> > Post messages to: VirtualVairs at corvair.org
> > Change your options: http://www.vv.corvair.org/mailman/options/ 
> > virtualvairs
> > _______________________________________________
>