<VV> '61 doors removal
J R Read
hmlinc at sbcglobal.net
Fri Jul 1 22:03:28 EDT 2011
I broke 3 large Phillips which had a hex on the top so I was using a wrench
on that. Just kept returning them under the lifetime guarantee until I got
all the screws out.
Later, JR
----- Original Message -----
From: "Ken Clark" <kcvair at hotmail.com>
To: <dziegler3 at comcast.net>
Cc: <virtualvairs at corvair.org>
Sent: Friday, July 01, 2011 4:07 PM
Subject: Re: <VV> '61 doors removal
>
> That was one thing tried with large phillips, but the phillips broke, may
> need to drill it out. Got one of 3 out at least. Ken
>
>
>
>> CC: virtualvairs at corvair.org
>> From: dziegler3 at comcast.net
>> Subject: Re: <VV> '61 doors removal
>> Date: Thu, 30 Jun 2011 14:13:31 -0400
>> To: kcvair at hotmail.com
>>
>> A hand impact driver with a phillips bit that fits snugly.
>>
>> Dave.. ..
>> On Jun 30, 2011, at 1:45 PM, Ken Clark wrote:
>>
>> >
>> > Is there any easy/good way to remove the doors off a '61 Lakewood.
>> > The fronts appear to mave bolt heads on the inside of the car and
>> > the heater hose would have to be removed. The rear doors have
>> > phillips head bolts on lower hinge. We got one bolt loose and the
>> > next step may be drilling the other 2 out. any suggestions on
>> > something that has been in place for 50 years. Ken Clark
>> > _______________________________________________
>> > This message was sent by the VirtualVairs mailing list, all
>> > copyrights are the property
>> > of the writer, please attribute properly. For help, mailto:vv-
>> > help at corvair.org
>> > This list sponsored by the Corvair Society of America, http://
>> > www.corvair.org/
>> > Post messages to: VirtualVairs at corvair.org
>> > Change your options: http://www.vv.corvair.org/mailman/options/
>> > virtualvairs
>> > _______________________________________________
>>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help,
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________
More information about the VirtualVairs
mailing list