<VV> Corvan fuel tank

Vairtec Corporation Vairtec at optonline.net
Fri Jun 10 20:48:27 EDT 2011


Gene, no need to drop the suspension crossmember.  It's a tight squeeze 
getting the tank out (and back in), but there is no need to disturb the 
suspension.

--Bob Marlow


On 6/10/2011 8:36 PM, Ebarr19 at aol.com wrote:
> Hi all
>     I picked up a corvan a while back and I need to drop the fuel tank. (
> can't get fuel to flow ) I used compressed air from the pump to tank and the
> line is clear, so the problem is at the tank. My question is can I drop the
> tank with only removing the shift rod and hose,electric etc. at tank ?? (
> hope I don't have to drop the crossmember )
>    I had a van back in 1967 but never had to drop the tank.
> Thanks
>    Gene Barr
> 63 autocross car ( The Geezer )
> 61 corvan
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>   _______________________________________________
>
>




More information about the VirtualVairs mailing list