<VV> Resistor Question - Update

[lonwall@corvairunderground.com]

So you're saying that the Ignitor WILL NOT work on 8.6-11.9 volts?  Lon


On 11/11/2011 10:11 AM, Eric S. Eberhard wrote:
> 1) Experience
> 2) Documentation
>
> So we would not be wrong ... that would make it not a falsehood and
> .. you are wrong on this one ;-)
>
> Eric
>
> At 05:55 PM 11/10/2011, you wrote:
>> From: "Dennis Pleau"<dpleau at wavecable.com>
>> Subject: Re:<VV>  Resistor Question - Update
>> To:<virtualvairs at corvair.org>
>> Message-ID:<000601cca004$e710c110$b5324330$@com>
>> Content-Type: text/plain;       charset="us-ascii"
>>
>> On my 65 140, the Pertronics worked just fine being powered through the
>> ballast resistor wire.  When I installed the Pertronics in Debbie's Lakewood
>> and powered it with the ballast resistor it couldn't get out of its own way
>> until I powered it with 12V.  I installed the Pertronics in my Greenbrier
>> with 12V.
>>
>> My take away after installing the first two, was the voltage after the
>> ballast resistor may or may not work.  If it did it was probably pretty
>> marginal.  I did eventually change the 65 to 12V just to make sure I never
>> had a problem.
>>
>> dp
>>
>>> From: virtualvairs-bounces at corvair.org
>>> [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
>>> lonwall at corvairunderground.com
>>   ...snip...
>>> you would be wrong.
>>>
>>> Why is it so difficult for people to abandon this falsehood?
>>>
>>> Lon
>
> Eric S. Eberhard
> (928) 567-3727          Voice
> (928) 567-6122          Fax
> (928) 301-7537                           Cell
>
> Vertical Integrated Computer Systems, LLC
> Metropolis Support, LLC
>
> For Metropolis support and VICS MBA Support!!!!    http://www.vicsmba.com
>
> For pictures:  http://www.vicsmba.com/ourpics/index.html
>
> (You can see why we love this state :-) )
>
>   _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are the property
> of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>   _______________________________________________
>
>