<VV> Speedo question

J R Read hmlinc at sbcglobal.net
Sun Oct 9 00:59:40 EDT 2011

You have the correct dust cap on the LF?  The one where the square "peg" 
fits into?
Later, JR

----- Original Message ----- 
From: "Bill H." <gojoe283 at yahoo.com>
To: <VirtualVairs at corvair.org>
Sent: Saturday, October 08, 2011 11:11 PM
Subject: <VV> Speedo question

>                                            B"H
> Hi all.  The speedo on my new 66 Monza doesn't work.  Pulled the cable 
> from the dash and it turns freely.  Put a vice grip on that end and pulled 
> the cable from the left front wheel.  Cable looks ok, is flattened into a 
> square at the end.  When I turned it from that end, I could hear the vice 
> grip turning inside the car, so the cable isn't severed.
> Has anyone  had this problem before?  Possible problem with the spindle, 
> or maybe the wheel end of the cable is just worn?
> Thanks everyone...Bill Hershkowitz 66 Monza Sport Sedan 110 PG
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
> _______________________________________________ 

More information about the VirtualVairs mailing list