<VV> Electrical problem humor

jimster1 jimster1 at earthlink.net
Thu Oct 13 02:33:45 EDT 2011

It's a dimmer switch when it's manufactured by Lucas.

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of J R Read
Sent: Wednesday, October 12, 2011 6:15 PM
To: VirtualVairs AA
Subject: <VV> Electrical problem humor

Dang, I've always called it the dimmer switch - now I find out that it is 
the brightener switch.  I think that a light just went on!
Later, JR

----- Original Message ----- 
From: "Bryan Blackwell" <bryan at skiblack.com>
To: "Lite Trix Inc." <litetrix at aol.com>
Cc: <virtualvairs at corvair.org>
Sent: Wednesday, October 12, 2011 7:23 PM
Subject: Re: <VV> Electrical problem

> Yes, most likely the high beam switch or a corroded connector.  The 
> switches are inexpensive, I'd get a new switch and clean everything up, 
> that usually does it.
> --Bryan
> On Oct 12, 2011, at 8:03 PM, Lite Trix Inc. wrote:
>> Have 61 Lakewood with headlight problem. if I pull headlight switch to 
>> half position, parking lights and tail lights come on. If I pull 
>> headlight switch all the way out, tail lights still on. But, depending on

>> high beam switch position, I either have headlights and parking lights 
>> both on or both off. Does this problem sound like a bad high beam switch,

>> headlight switch, or wiring harness? Thanks
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 

More information about the VirtualVairs mailing list