<VV> Electrical problem

[Ken Pepke]

In these cases it is not unusual to find the carpet somewhat damp.  If yours is damp it is a good idea to find the source of the leak.  If not repaired the new switch will also fail.

Ken P
Wyandotte, MI
Worry looks around; Sorry looks back, Faith looks up.

********************************

> From: Bryan Blackwell <bryan at skiblack.com>
> Date: October 12, 2011 8:23:10 PM EDT
> To: "Lite Trix Inc." <litetrix at aol.com>
> Cc: virtualvairs at corvair.org
> Subject: Re: <VV> Electrical problem
> 
> Yes, most likely the high beam switch or a corroded connector.  The switches are inexpensive, I'd get a new switch and clean everything up, that usually does it.
> 
> --Bryan
> 
> On Oct 12, 2011, at 8:03 PM, Lite Trix Inc. wrote:
> 
>> Have 61 Lakewood with headlight problem. if I pull headlight switch to half position, parking lights and tail lights come on. If I pull headlight switch all the way out, tail lights still on. But, depending on high beam switch position, I either have headlights and parking lights both on or both off. Does this problem sound like a bad high beam switch, headlight switch, or wiring harness? Thanks