<VV> storing motor parts

[N2VZD at aol.com]

i use a product called  "FLUID FILM" to protect parts from rust when  stor
ing. my cams from motors are on a board  with holes bored with forstner  bits 
(flat bottom) to fit the lifters next to the lobe  they rode with. i  spray 
them , then a wrap of saran wrap.  same with crank shafts.  i  don't keep a 
lot of stuff here anymore , but this has worked for a long time .  fluid 
film is a spray can of cosmoline, one of the best rust preventing coatings  
out there. it washes off in a parts washer or with kerosene . i suppose you  
could just wipe it off with a rag. it would also be good to spray in bad 
areas  of the car body's , or anything metal. i have it on all the problem areas 
on my  modern cars , on brake , fuel , and power steering lines.
you could make a paste of thinned grease and put it on with a brush. the  
spray can is kind of pricy. i think blaster makes a version now also.
regards, Tim Colson     frun the salt city area