<VV> Engine disassembly

[Dennis Pleau]

I never had problems with my Colorado cars (or NM and CA cars) head studs.
If you think you are going to have a problem soak them good with a 50/50
mixture of acetone and ATF. 

dp

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of shortle
Sent: Thursday, September 22, 2011 5:22 PM
To: virtualvairs at corvair.org
Subject: <VV> Engine disassembly

I am ready to take apart my '64 FC engine for complete cleaning and to
rebuild it. Is anything suggested before tearing into it as far as the head
nuts? I am hoping none of the studs unscrew out of the case. And if the
studs do unscrew out of the case, do we just screw them back in or is an
oversized stud suggested? I have been soaking the studs as well as I can
with Liquid Wrench for a few days now. Thanks for any suggestions, thoughts,
and opinions.
Timothy Shortle in Durango Colorado 81301
Getting ready for the Roundup next week in Missouri