<VV> Will 64-65 FC turnsingle fit in a 63 FC

[Mike]

Converted the 61 loadside yesterday. Used the column out of a 64 brier i scrapped . Works well now

Sent from my Samsung smartphone on AT&T

shortle <shortle556 at earthlink.net> wrote:

>Yes. But you will need the housing with switch and all wires coming from it. You will have to modify either or both harnesses (vehicle harness and or new switch harness). Or you make a "connector harness" to join the 2. There is also an issue with the cancelling as I recall. I did this same job 25+ years ago and it worked quite well as I recall.
>Timothy Shortle in Durango Colorado 81301
>
>
>-----Original Message-----
>>From: Jon Peters <1tallguy at att.net>
>>Sent: Feb 12, 2012 3:52 PM
>>To: virtualvairs at corvair.org
>>Subject: <VV> Will 64-65 FC turnsingle fit in a 63 FC
>>
>>Say will a 64-65 FC turn single system work in a 63 FC?
>>Jon Peters, Valley Center,  Calif. SDCC
>> _______________________________________________
>>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>>Post messages to: VirtualVairs at corvair.org
>>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
>> _______________________________________________
>
> _______________________________________________
>This message was sent by the VirtualVairs mailing list, all copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________