<VV> Still having electrical problems / Pulsing lights
Mark Durham
62vair at gmail.com
Sat Feb 25 22:58:15 EST 2012
I would suggest the alternator and regulator switch at the same time.
You may have fried one of the diodes in the alternator so the regulator
has a hard time sensing and regulating. Mark Durham
Sent from my Windows Phone
From: Matt Nall
Sent: 2/25/2012 17:46
To: virtualvairs at corvair.org
Subject: Re: <VV> Still having electrical problems / Pulsing lights
-----Original Message-----
From: James Cooper <cooperj123 at msn.com>
All of the
lights in the car pulse with the engine running. They pulse between bright and
dim at a rate of about 60-80 cycles per minute. Driving down the road if I
load up the alternator by switching on the high beams it made it stop pulsing,
but only temporarily. Sitting in the driveway it was pulsing and then when the
powerglide is selected into drive- it would stop pulsing, but only
temporarily.
Comes back within a few seconds.
============================================
Normally that is the Voltage regulator causing that... The Alt.
turns constantly... and so that eliminates it!
Matt Nall
Charleston, Oregon
http://tinyurl.com/The-Patio
http://tinyurl.com/Matts-Tech-Pages
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list