<VV> LM Shifter Adjustment

[Brian]

It worked1  Took about 3/4 of inch instead of the inch you mentioned but it worked.  Thanks.
---------- Original Message ----------
From: James Davis <jld at wk.net>
To: Brian <bmoneill at juno.com>
Subject: Re: <VV> LM Shifter Adjustment
Date: Fri, 27 Jan 2012 09:45:58 -0600

Shift into 4th.  Loosen the clamp on the coupler.  Make sure the guide 
roll pin in in the coupler.  Pull back on the shifter lever until it 
hits the stop.  Slowly move the shifter forward one inch.  Tighten the 
clamp on the coupler.  If the roll pin is not in the coupler, drive a 
new one in before attempting.  The guide pin locates the gate in proper 
alignment to allow reverse to be selected.
Jim Davis

On 1/27/2012 9:12 AM, Brian wrote:
> Anybody got a good method to adjust the shifter on an LM 4 speed?  The procedure in the shop manual gives a process which calls for measuring the distance from the shifter to the front bench seat.  I have a COSA with bucket seats with seat extenders. Having  a hell of a time getting a smooth shift and reverse is almsot impossible.  Everything is new and there are the bushings in the shifter tube. Thanks in advance.
>
____________________________________________________________
53 Year Old Mom Looks 33
The Stunning Results of Her Wrinkle Trick Has Botox Doctors Worried
http://thirdpartyoffers.juno.com/TGL3131/4f240ce68e0164ac728st04vuc