<VV> was Positive Crankcase Vents now draft tube request.

[Mark Durham]

Seth, my original car had a draft tube and the tin in this car is cut
for the draft tube. I'm thinking of removing the pcv and go back to the
draft tube. Anybody out there got one? Just reply to me off line.
Mark Durham

Sent from my Windows Phone
From: Sethracer at aol.com
Sent: 10/19/2012 20:38
To: corvairduval at cox.net; virtualvairs at corvair.org
Subject: <VV> Positive Crankcase Vents
>From VV:
One of the reasons for no mention of a pcv valve is that they are  only
used on two years of car production (62 & 63).

OK, let me  edit this before the experts do, they were also used on 64-65
cars with AC  and 62 to 65 FCs. I know Clark's says they also fit 61
models, but all the  cars and FCs around here had road draft tubes for 60
& 61.


So:
California had them in early mid-year 1961 models and all of  62-63. I just
removed a complete set-up from a 65 A/C car, as you  mentioned.  - Seth
Emerson

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights
are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________