<VV> Heater Cable & Noise Surpression Condenser

[Shelrockbored at aol.com]

First Topic
 
Helping to fix a friend's 62 Monza.  The car was converted back to hot  air 
from gas heater.  New heater, air, and defroster cables were installed  but 
they came without the clamps which connect them to the heater switch  
assembly.  Clarks only lists them for Lates.  Note: the wire  rings are intact 
and can be connected to the switches, that's not the  problem.  The cables 
themselves have to be connected over the cable  sheathing by crimped clamps 
which then screw to the assembly.  This is the  part that's missing.
 
What can be done?
 
Second Topic
 
Which terminal on the Voltage Regulator does the noise suppression  
condenser hook to.  I didn't take it out and cannot find out where it  connects.  
My guess would be primary terminal F.  But that's a  guess.
 
Steve Sassi
Long Island Corvair